The No531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers.
Còn hàng
12 tháng
3319
184.800.000 VND
($ 8.800)
The No531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker.
The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence.
Main Features
Reliable, high-power in four different channel configurations provide ideal solutions for any system
Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
Ethernet and 12V trigger control capability for system integration
SPECIFICATIONS
Inputs
one balanced XLR input per channel; one unbalanced RCA input per channel
Speaker Connections
one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)
Communication and Control
one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector
Rated Output Power into 8 ohms
300W/ch (20Hz to 20kHz at <0.5% THD)
Frequency Response
within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio
>85dB, reference level: 2.83 Vrms
Input Sensitivity
2.83Vrms output at 130mVrms input
Gain
26.8dB
Input Impedance
60 kΩ (balanced); 30 kΩ (unbalanced)
Power Requirements
100V~, 120V~, 230V~, factory set for destination country;