Trong kho : Còn hàng
Bảo hành : 12 tháng
K3
For our more compact floor-standing K Series speaker, the K3, a specific Kevlar drive unit needed to be developed.
This driver works higher into the midrange frequencies and benefits from better detail and dispersion due to the incorporation of a phase plug.
Two of these drive units are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high-quality crossover was specially designed for the K3 to seamlessly mate with the ribbon tweeter. The crossover uses high quality components and is split for bi-wiring.
As far as sound quality goes the K3 has a wonderfully electrostatic type of midrange which is very clear and detailed, with a dynamic bass response.
The K3 is designed for our customers who want a compact speaker that can deliver a powerful sound with ease, such as full orchestral music or loud rock.
Featured veneer: Cherry
K1 (Ebony / Rosewood) |
|
| Black Ash / Mahogany / Cherry / Maple / Silk White | 41.000.000 VNĐ |
| Ebony / Rosewood | 480.000.000 VNĐ |
SPECIFICATION
| NOMINAL IMPEDANCE | 4 ohms |
| RECOMMENDED AMPLIFIERS | 10-250W |
| FREQUENCY RESPONSE | 25Hz-30KhZ |
| SENSITIVITY | 89 dB linear for 1 watt at 1 metre |
| BASS /MIDRANGE DRIVERS | 2x ProAc 165mm (6.5”) special bass/midrange drive unit with Kevlar cone and phase plug. |
| TWEETER | ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping. |
| CROSSOVER | Finest components on dedicated dual layer circuit board. ProAc multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. |
| HEIGHT (CABINET) | 1073mm (42 ¼ “) |
| WIDTH (CABINET) | 210mm (8.5”) |
| DEPTH (CABINET) | 340mm (13.5”) |
| WEIGHT | 42kgs (92.6lbs) each cabinet |
| MODE | Floor standing |
| GRILLE | Acoustically transparent crimplene |
| STANDARD FINISHES | Black Ash, Mahogany, Cherry, Oak, Silk White, Natural Oak and Walnut |
| PREMIUM FINISHES | Rosewood, Ebony. *Premium Finishes to order at extra cost* |